BARD Basics

| More

Signing Up for BARD

Watch this instructional video

Go to: http://www.braillelibrary.org/bard or https://nlsbard.loc.gov

  • Follow the instructions to application link and fill out the online application.
  • NLS will send a confirming email and there will be further emails to follow at a later date to allow the patron access to BARD.

Equipment Needed for BARD

A computer and a high speed internet connection is required. One will also need a blank cartridge or conventional USB flash drive, sometimes referred to as a jump drive or memory stick.

Downloading Books

Each book on the BARD site has a download link. Press enter on the link to start the download process.

  • You will be prompted to Open or Save the file. Choose Save.
  • Another screen comes up which you can navigate with your tab key to take note of where the file is being saved.
  • Press the space bar on the save button to start the download.

Listening to Downloaded Books

Find out what firmware you have:

With no cartridge or USB thumb drive connected, press the Sleep button ten times. The serial number and the software version will be announced repeatedly.  Press the Play button to stop this announcement.

If the firmware is earlier than 2.1:

  • Unzip the folder containing the files for the downloaded book and paste those files to the root directory of the flash drive or other storage medium. Do not place in a folder or subfolder.
  • Plug the flash drive into the USB port located just behind the earphone jack of the digital machine.
  • The machine will recognize the book as an NLS book and start playing.

If the firmware is 2.1 or later:

  • Unzip the book to a folder.
  • Paste this folder to the root directory of your thumb drive.
  • You can put multiple books on a thumb drive and a machine with software version 2.1 or later will recognize them.
  • You can press and hold the play button to enter the bookshelf function, and use the Forward and Rewind buttons to select a book.

Unzipping Downloaded Files

There are a number of unzip programs. This example applies to Windows XP:

  • Locate the book you want to unzip.
  • Press the "Windows Context Key" which is to the left of the right hand control key on the keyboard.
  • Arrow down to extract all and press "Enter."
  • A “wizard” opens up. Continue with the process by pressing the spacebar on the next button.
  • The wizard will then tell you the folder where the files are going to go. You can accept that folder and press "Next" with the space bar.
  • The wizard will then start to unzip the files. This can take a minute.
  • When the wizard is done you will be presented with the final dialog. There is a checkbox to show extracted files. Uncheck this box by using the space bar.
  • After you’ve unchecked this box, tab to the finish button and press the spacebar.
  • At this point, locate the folder you’ve unzipped the downloaded book to.
  • Press "Control-C" to copy.
  • Locate your flash drive.
  • Press "Control-V" to paste the book to the flash drive.

Purchasing Blank Cartridges

You may purchase and blank digital cartridge to use for your book downloads. A 2 GB cartridge will hold approximately 20 NLS books. You will need a USB cable along with the blank cartridge in order to use them for your downloads.

Blank cartridges with a USB cable are now available for purchase through following sources:

BRAILLE INSTITUTE VISTAS STORE
Blank Cartridge: $15.95 and USB Cable: $7.95
You may reach Vistas at (323) 663-1111

AMERICAN PRINTING HOUSE FOR THE BLIND
Blank Cartridge: $12.00 and USB Cable: $5.00
You may reach APH at (800) 223-1839

ADAPTIVE TECHNOLOGY (A DIVISION OF PERKINS PRODUCTS)
Blank Cartridge: $11.99 and USB Cable: $9.95,
or get the Bundled Package: $18.99
You may reach Adaptive Technology at (978) 462-3817

How to Use Blank Cartridges

Connect the cartridge to your computer using the USB cable. Transfer downloaded books to the cartridge. Disconnect the cartridge from the cable and insert it in the front slot of your player for playback.